emVIEW-7/RPI3: Cost effective 7" touch panel system based on Raspberry Pi 3

​With the emPC-A/RPI3 Janz Tec AG provides a device which uses an original Raspberry Pi 3 model B module inside. This module is mounted on a main board providing a 24VDC power supply, an additional CAN interface, a real-time clock, digital inputs and outputs and an additional RS232/RS485 interface. 
​A minimal Raspbian Linux is installed and supports all interfaces of the emPC-A/RPI. If required, a CODESYS runtime environment can be installed as well.

---

LCD Display

• 7.0" WSVGA display size
• LED backlight technology
• Aspect ratio 16:9
• Resolution 800 x 480
• Luminance 350 cd/m² (typ.)
  
  

Touch Screen

• Projected capacitive touch screen (PCAP) 
  ​(with multitouch capabilities)
• Glass surface

Processor

• Powered by Raspberry Pi 3, Model B
• Quad-Core CPU based on ARM Cortex-A53 with 4 x 1.2 GHz MHz
• Fanless cooling concept
• Real-time clock, battery buffered

​

More Information.

Interfaces

• 1 x 10/100 MBit/s Ethernet 
• BCM43143 WiFi/WLAN on board
• Bluetooth Low Energy (BLE) on board
• 1 x HDMI graphic interface
• 4 x USB (v2.0)
• 1 x 9-pin D-SUB connector for serial debug console
• 1 x I/O connector, providing:

          1 x CAN; 1 x RS232 / RS485
          4 x digital inputs (isolated from logic)
          4 x digital output (0.5 A max.)

• 10...32VDC ext. powered (isolated from logic)
  ​

Dimensions:  203 x 121 x 55 mm (w x h x d)

Weight:  approx. 0.6 kg
​
DIN rail mounting